Skip to main navigation Skip to search Skip to main content

Experimental and numerical modelling of the residual stresses induced in orthogonal cutting of AISI 316L steel

  • J. C. Outeiro*
  • , D. Umbrello
  • , R. M'Saoubi
  • *Corresponding author for this work

    Research output: Contribution to journal › Article › peer-review

    237 Citations (Scopus)

    Abstract

    Residual stresses in the machined surface layers are affected by the cutting tool, work material, cutting regime parameters (cutting speed, feed and depth of cut) and contact conditions at the tool/chip and tool/workpiece interfaces. In this paper, the effects of tool geometry, tool coating and cutting regime parameters on residual stress distribution in the machined surface and subsurface of AISI 316L steel are experimentally and numerically investigated. In the former case, the X-ray diffraction technique is applied, while in the latter an elastic-viscoplastic FEM formulation is implemented. The results show that residual stresses increase with most of the cutting parameters, including cutting speed, uncut chip thickness and tool cutting edge radius. However, from the range of cutting parameters investigated, uncut chip thickness seems to be the parameter that has the strongest influence on residual stresses. The results also show that sequential cuts tend to increase superficial residual stresses.

    Original languageEnglish
    Pages (from-to)1786-1794
    Number of pages9
    JournalInternational Journal of Machine Tools and Manufacture
    Volume46
    Issue number14
    DOIs
    Publication statusPublished - Nov 2006

    Keywords

    • FEM
    • Machining
    • Metal cutting
    • Modelling
    • Residual stresses

    Fingerprint

    Dive into the research topics of 'Experimental and numerical modelling of the residual stresses induced in orthogonal cutting of AISI 316L steel'. Together they form a unique fingerprint.

    Cite this