Identification of ADACOR holons for manufacturing control

Paulo Leitāo; Francisco Restivo

doi:10.1016/S1474-6670(17)37744-3

Identification of ADACOR holons for manufacturing control

Paulo Leitāo, Francisco Restivo

Research output: Contribution to journal › Conference article › peer-review

5 Citations (Scopus)

Abstract

The identification of the holons is a critical task in the development of holonic manufacturing control system applications. This paper discusses a methodology to develop distributed manufacturing control systems for the shop floor level, based on the ADACOR holonic architecture. The methodology comprises a set of steps, the more relevant being the identification of the manufacturing holons and the development of holons based on re-use libraries supported by the ADACOR approach. The paper focus on the first step and describes a procedure to identify the holons present in a manufacturing system.

Original language	English
Pages (from-to)	109-114
Number of pages	6
Journal	IFAC Proceedings Volumes (IFAC-PapersOnline)
Volume	36
Issue number	3
DOIs	https://doi.org/10.1016/S1474-6670(17)37744-3
Publication status	Published - 2003
Externally published	Yes
Event	7th IFAC Workshop on Intelligent Manufacturing Systems, IMS 2003 - Budapest, Hungary Duration: 6 Apr 2003 → 8 Apr 2003

Keywords

Agents
Agile manufacturing
Holonic manufacturing systems
Intelligent manufacturing systems
Shop floor control

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

Access to Document

10.1016/S1474-6670(17)37744-3

Cite this

@article{e6c31211583a49ef83c87f7d3120b987,

title = "Identification of ADACOR holons for manufacturing control",

abstract = "The identification of the holons is a critical task in the development of holonic manufacturing control system applications. This paper discusses a methodology to develop distributed manufacturing control systems for the shop floor level, based on the ADACOR holonic architecture. The methodology comprises a set of steps, the more relevant being the identification of the manufacturing holons and the development of holons based on re-use libraries supported by the ADACOR approach. The paper focus on the first step and describes a procedure to identify the holons present in a manufacturing system.",

keywords = "Agents, Agile manufacturing, Holonic manufacturing systems, Intelligent manufacturing systems, Shop floor control",

author = "Paulo Leitāo and Francisco Restivo",

note = "Publisher Copyright: Copyright {\textcopyright} 2003 IF AC. Copyright: Copyright 2019 Elsevier B.V., All rights reserved.; 7th IFAC Workshop on Intelligent Manufacturing Systems, IMS 2003 ; Conference date: 06-04-2003 Through 08-04-2003",

year = "2003",

doi = "10.1016/S1474-6670(17)37744-3",

language = "English",

volume = "36",

pages = "109--114",

journal = "IFAC Proceedings Volumes (IFAC-PapersOnline)",

issn = "1474-6670",

publisher = "IFAC Secretariat",

number = "3",

}

TY - JOUR

T1 - Identification of ADACOR holons for manufacturing control

AU - Leitāo, Paulo

AU - Restivo, Francisco

PY - 2003

Y1 - 2003

N2 - The identification of the holons is a critical task in the development of holonic manufacturing control system applications. This paper discusses a methodology to develop distributed manufacturing control systems for the shop floor level, based on the ADACOR holonic architecture. The methodology comprises a set of steps, the more relevant being the identification of the manufacturing holons and the development of holons based on re-use libraries supported by the ADACOR approach. The paper focus on the first step and describes a procedure to identify the holons present in a manufacturing system.

AB - The identification of the holons is a critical task in the development of holonic manufacturing control system applications. This paper discusses a methodology to develop distributed manufacturing control systems for the shop floor level, based on the ADACOR holonic architecture. The methodology comprises a set of steps, the more relevant being the identification of the manufacturing holons and the development of holons based on re-use libraries supported by the ADACOR approach. The paper focus on the first step and describes a procedure to identify the holons present in a manufacturing system.

KW - Agents

KW - Agile manufacturing

KW - Holonic manufacturing systems

KW - Intelligent manufacturing systems

KW - Shop floor control

UR - http://www.scopus.com/inward/record.url?scp=33847261256&partnerID=8YFLogxK

U2 - 10.1016/S1474-6670(17)37744-3

DO - 10.1016/S1474-6670(17)37744-3

M3 - Conference article

AN - SCOPUS:33847261256

SN - 1474-6670

VL - 36

SP - 109

EP - 114

JO - IFAC Proceedings Volumes (IFAC-PapersOnline)

JF - IFAC Proceedings Volumes (IFAC-PapersOnline)

IS - 3

T2 - 7th IFAC Workshop on Intelligent Manufacturing Systems, IMS 2003

Y2 - 6 April 2003 through 8 April 2003

ER -

Identification of ADACOR holons for manufacturing control

Abstract

Keywords

UN SDGs

Access to Document

Other files and links

Fingerprint

Cite this