Characterization of Requeijao and technological optimization of its manufacturing process

M. E. Pintado, J. A. Lopes da Silva, F. X. Malcata*

*Autor correspondente para este trabalho

Resultado de pesquisarevisão de pares

21 Citações (Scopus)
9 Transferências (Pure)

Resumo

In attempts to characterize Portuguese whey cheese (Requeijao) and optimize the manufacture thereof, 17 whey cheeses were produced according to a factorial design using heating time, heating temperature and fractional addition of ovine/caprine milk as manipulated technological variables. Chemical analyses were carried out for the 17 cheeses, whereas sensorial and rheological analyses were carried out for eight selected whey cheeses and a reference (i.e. a whey cheese produced locally according to traditional procedures). A true local maximum exists for moisture content (at a temperature of about 93°C heating time of about 30 min and addition of about 17% ovine milk) which lies well within the range chosen for experimentation. Fat content of Requeijão was positively affected by heating temperature (especially via its quadratic effect) and, to a lesser extent, by heating time (especiallv via its linear effect); nitrogen content was especially affected by heating temperature (via its quadratic effect); and moisture content was affected especially by heating temperature (via its quadratic effect). The sensorial analyses showed that the eight whey cheeses produced were preferred with respect to the reference whey cheese. For rheological analyses the most significant observations pertain to the high strain dependence of the dynamic moduli, absence of a true equilibrium storage modulus, and relatively low difference between the loss and the storage modulus.
Idioma originalEnglish
Páginas (de-até)363-376
Número de páginas14
RevistaJournal of Food Engineering
Volume30
Número de emissão3-4
DOIs
Estado da publicaçãoPublicado - 1996

Impressão digital

Mergulhe nos tópicos de investigação de “Characterization of Requeijao and technological optimization of its manufacturing process“. Em conjunto formam uma impressão digital única.

Citação