Evaluation of surface roughness of dental composites subject to different methods of finish and polishing

Mariana Rios; Filipe Araújo; Tiago Marques; Filipe Oliveira; Mário Vaz; André Correia

Evaluation of surface roughness of dental composites subject to different methods of finish and polishing

Mariana Rios, Filipe Araújo, Tiago Marques, Filipe Oliveira, Mário Vaz, André Correia

Resultado de pesquisa › revisão de pares

9 Transferências (Pure)

Resumo

This research compares the effect of different rotary instruments for finishing (tungsten carbide laminated drill or diamond drill) on composite restorations and on the interface between enamel and composite. The composite resins used were HRi® (Micerium)- nanoparticle dental resin and Synergy®D6 (Coltène) nanohybrid resin. Surface roughness was evaluated using optical profilometry and studied with SensoScan software 5.3 (SensoTech, S.L.). Statistical analysis was performed using IBM SPSS software (v.23) to identify significant differences on the roughness surface on finishing and polishing procedures.

Idioma original	English
Título da publicação do anfitrião	Proceedings of the 7th International Conference on Mechanics and Materials in Design
Editores	J. F. Silva Gomes, S. A. Meguid
Local da publicação	Porto
Editora	Universidade do Porto
Páginas	1785-1786
Número de páginas	2
ISBN (impresso)	9789899883277
Estado da publicação	Publicado - 2017
Evento	7th International Conference on Mechanics and Materials in Design (M2D) - Albufeira Duração: 11 jun. 2017 → 15 jun. 2017

Conferência

Conferência	7th International Conference on Mechanics and Materials in Design (M2D)
País/Território	Portugal
Cidade	Albufeira
Período	11/06/17 → 15/06/17

Acesso ao documento

28305624Final published version, 99,9 KBLicença: Unspecified

http://hdl.handle.net/10400.14/33337Licença: Unspecified

Citação

Rios, M., Araújo, F., Marques, T., Oliveira, F., Vaz, M., & Correia, A. (2017). Evaluation of surface roughness of dental composites subject to different methods of finish and polishing. Em J. F. S. Gomes, & S. A. Meguid (Eds.), Proceedings of the 7th International Conference on Mechanics and Materials in Design (pp. 1785-1786). Artigo 6941 Universidade do Porto. http://hdl.handle.net/10400.14/33337

@inproceedings{ddcaf7d12f15430bbd80dc20330ca8d7,

title = "Evaluation of surface roughness of dental composites subject to different methods of finish and polishing",

abstract = "This research compares the effect of different rotary instruments for finishing (tungsten carbide laminated drill or diamond drill) on composite restorations and on the interface between enamel and composite. The composite resins used were HRi{\textregistered} (Micerium)- nanoparticle dental resin and Synergy{\textregistered}D6 (Colt{\`e}ne) nanohybrid resin. Surface roughness was evaluated using optical profilometry and studied with SensoScan software 5.3 (SensoTech, S.L.). Statistical analysis was performed using IBM SPSS software (v.23) to identify significant differences on the roughness surface on finishing and polishing procedures.",

keywords = "Composite resins, Surface roughness, Dental finishing, 3D profilometry",

author = "Mariana Rios and Filipe Ara{\'u}jo and Tiago Marques and Filipe Oliveira and M{\'a}rio Vaz and Andr{\'e} Correia",

year = "2017",

language = "English",

isbn = "9789899883277",

pages = "1785--1786",

editor = "Gomes, {J. F. Silva} and Meguid, {S. A.}",

booktitle = "Proceedings of the 7th International Conference on Mechanics and Materials in Design",

publisher = "Universidade do Porto",

address = "Portugal",

note = "7th International Conference on Mechanics and Materials in Design (M2D) ; Conference date: 11-06-2017 Through 15-06-2017",

}

Rios, M, Araújo, F , Marques, T, Oliveira, F, Vaz, M & Correia, A 2017, Evaluation of surface roughness of dental composites subject to different methods of finish and polishing. em JFS Gomes & SA Meguid (eds), Proceedings of the 7th International Conference on Mechanics and Materials in Design., 6941, Universidade do Porto, Porto, pp. 1785-1786, 7th International Conference on Mechanics and Materials in Design (M2D), Albufeira, Portugal, 11/06/17. <http://hdl.handle.net/10400.14/33337>

Evaluation of surface roughness of dental composites subject to different methods of finish and polishing. / Rios, Mariana; Araújo, Filipe ; Marques, Tiago et al.
Proceedings of the 7th International Conference on Mechanics and Materials in Design. ed. / J. F. Silva Gomes; S. A. Meguid. Porto: Universidade do Porto, 2017. p. 1785-1786 6941.

Resultado de pesquisa › revisão de pares

TY - GEN

T1 - Evaluation of surface roughness of dental composites subject to different methods of finish and polishing

AU - Rios, Mariana

AU - Araújo, Filipe

AU - Marques, Tiago

AU - Oliveira, Filipe

AU - Vaz, Mário

AU - Correia, André

PY - 2017

Y1 - 2017

N2 - This research compares the effect of different rotary instruments for finishing (tungsten carbide laminated drill or diamond drill) on composite restorations and on the interface between enamel and composite. The composite resins used were HRi® (Micerium)- nanoparticle dental resin and Synergy®D6 (Coltène) nanohybrid resin. Surface roughness was evaluated using optical profilometry and studied with SensoScan software 5.3 (SensoTech, S.L.). Statistical analysis was performed using IBM SPSS software (v.23) to identify significant differences on the roughness surface on finishing and polishing procedures.

AB - This research compares the effect of different rotary instruments for finishing (tungsten carbide laminated drill or diamond drill) on composite restorations and on the interface between enamel and composite. The composite resins used were HRi® (Micerium)- nanoparticle dental resin and Synergy®D6 (Coltène) nanohybrid resin. Surface roughness was evaluated using optical profilometry and studied with SensoScan software 5.3 (SensoTech, S.L.). Statistical analysis was performed using IBM SPSS software (v.23) to identify significant differences on the roughness surface on finishing and polishing procedures.

KW - Composite resins

KW - Surface roughness

KW - Dental finishing

KW - 3D profilometry

M3 - Conference contribution

SN - 9789899883277

SP - 1785

EP - 1786

BT - Proceedings of the 7th International Conference on Mechanics and Materials in Design

A2 - Gomes, J. F. Silva

A2 - Meguid, S. A.

PB - Universidade do Porto

CY - Porto

T2 - 7th International Conference on Mechanics and Materials in Design (M2D)

Y2 - 11 June 2017 through 15 June 2017

ER -

Evaluation of surface roughness of dental composites subject to different methods of finish and polishing

Resumo

Conferência

Acesso ao documento

Impressão digital

Citação