Safety assessment of the process WIP, based on Starlinger deCON technology, used to recycle post-consumer PET into food contact materials

Vittorio Silano, José Manuel Barat Baviera, Claudia Bolognesi, Andrew Chesson, Pier Sandro Cocconcelli, Riccardo Crebelli, David Michael Gott, Konrad Grob, Claude Lambré, Marcel Mengelers, Alicja Mortensen, Gilles Rivière, Inger Lise Steffensen, Christina Tlustos, Henk Van Loveren, Laurence Vernis, Holger Zorn, Vincent Dudler, Maria Rosaria Milana, Constantine PapaspyridesMaria de Fátima Tavares Poças, Alexandros Lioupis, Evgenia Lampi

Resultado de pesquisarevisão de pares

Resumo

The EFSA Panel on Food Contact Materials, Enzymes and Processing Aids (CEP) assessed the safety of the recycling process WIP (EU register number RECYC187), which uses the Starlinger deCON technology. The input material is hot washed and dried poly(ethylene terephthalate) (PET) flakes originating from collected post-consumer PET containers, e.g. bottles, including no more than 5% PET from non-food consumer applications. The flakes are preheated before being submitted to solid-state polycondensation (SSP) in a continuous reactor at high temperature under vacuum and gas flow. Having examined the challenge test provided, the Panel concluded that the preheating (step 2) and the decontamination in the continuous SSP reactor (step 3) are critical in determining the decontamination efficiency of the process. The operating parameters to control the performance of these critical steps are temperature, pressure, residence time and gas flow rate. It was demonstrated that this recycling process is able to ensure a level of migration of potential unknown contaminants into food below the conservatively modelled migration of 0.1 μg/kg food. Therefore, the Panel concluded that the recycled PET obtained from this process is not considered to be of safety concern, when used at up to 100% for the manufacture of materials and articles for contact with all types of foodstuffs for long-term storage at room temperature, with or without hot-fill. Trays made of this recycled PET are not intended to be used in microwave and conventional ovens and such uses are not covered by this evaluation.
Idioma originalEnglish
Número do artigoe06187
RevistaEFSA Journal
Volume18
Número de emissão7
DOIs
Estado da publicaçãoPublicado - 1 jul. 2020
Publicado externamenteSim

Impressão digital

Mergulhe nos tópicos de investigação de “Safety assessment of the process WIP, based on Starlinger deCON technology, used to recycle post-consumer PET into food contact materials“. Em conjunto formam uma impressão digital única.

Citação